Index B400 Operating Instructions Manual page 69

Hide thumbs Also See for B400:

Table of Contents

Maintenance Summary - 4.000 Operating hours

Requirement

Procedure

Maintenance Instructions

B400 B500

DIE150EN - 15.08.2022

11. Activated carbon filter no automatic condensate drain

12. Pressure regulating valve with pressure sensor for glass scales sealing air

1.0 bar

13. Pressure regulating valve for steady rest

14. Proportional valve for gripping force adjustment (WPRU)

15. Safety pressure sensor

16. 3/2-way valve

17. Differential pressure sensor

If the differential pressure sensor (17) outputs an error message, all 5

filter elements on the pneumatic system must be replaced.

Filters are hazardous waste and must be disposed of in a controlled

manner.

Service and maintenance are to be carried out according to the

manufacturer's specifications.

1. Check pressure setting on pressure gauge and adjust if necessary. An

operating pressure of 6 bar has been set at the factory.

2. Check supply and fluid lines (damage and leakage). Supply and fluid lines must

be checked for damage. Pre-damage such as kinks or abrasions should be

logged and replacement should be initiated.

Example: Various silencer versions from FESTO

Check silencer, replace if necessary

4. Drain condensate (not applicable to auto-drain).

Table of Contents

B500