Cast Iron Wheels; Coplanar Adjustment - Craftex CX Series User Manual

Cast Iron Wheels

The CX108N comes with heavy duty cast
iron wheels for added stability and overall
performance.
A coplanar shim adjustment also added for
better alignment of the wheels that allow
the blade to run as straight as possible
ensuring straight and accurate cuts.
This feature will help improve the band saw
performance with the wheels working
together instead of against each other.
The end result will give you less vibration,
more power, accuracy and less wandering.
This will be noticed most when it comes
Figure-28 Washer
to resawing and making straight cuts with
blades larger than 1 /4".

Coplanar Adjustment

To move the wheel out remove the nut and
then remove the wheel.
Figure 28. Washer
Now you can add shims to the back of the
wheels as required. Replace the wheel and
any remaining shims and the nut and
tighten. To move the wheel in, remove the
cast iron wheel as mentioned above and
remove the shims from behind the wheel.
Replace the wheel, shims and nut and
retighten.
Figure-29 Top wheel back shims
18