11.3 MOUNTING THE CEILING FIXTURE
11.3.1 MOUNTING CEILING PANEL
WARNING: ELECTRIC SHOCK
Disconnect the on-site power supply from the mains and secure it against being
switched on again.
MOUNT CEILING PANEL
38
1. Remove the protective.
2. Loosen the three setscrews.
3. Remove canopy, mark holes with the drilling
template (page 43).
4. Drill four holes according to the specifications of
the manufacturer of the fastener.
5. Insert fasteners flush with ceiling.
NOTE: Do not proceed with installation
until the binder has cured.
6. Insert the fastener into the four holes and screw
on the ceiling panel.
7. Align ceiling panel horizontally, check for secure
seating.
8. Put on the canopy and tighten it with the three
setscrews.