10.2.6 REPLACING FUSES
WARNING: ELECTRIC SHOCK
For all maintenance work, disconnect the unit from the power supply, pull out the
power plug and secure the unit from being switched on again.
CAUTION: DAMAGE TO THE UNIT
Only the specified fuses (see chapter 12, "Technical Data", page 44) may be used.
REPLACE THE FUSES ON THE MOBILE STAND
1. Loosen the Phillips screw, but do not unscrew it completely.
2. Push up and secure the clamping ring, seal and housing.
3. Remove the defective fuse.
4. Replace defective fuse.
5. Insert new fuse.
31