MIMSAL MIMLED 600 Manual page 36

WALL MOUNTING
36
12. Unscrew the Phillips screw and pull the cover cap forward and
remove it upward.
13. Push the cable of the extension arm through the trunnion and
insert the extension arm with spring arm onto the trunnion of
the wall bearing.
14. Mount the washer, then the tab washer and then the circlip on
the trunnion of the wall bearing.
15. Insert the cable ends of the extension arm behind the trunnion
in the direction of the floor.
16. Fasten the red cable on the extension arm side in the connecting
terminal of the white plug-in power supply cable. Accordingly,
attach the black cable on the extension arm side to the
connecting terminal of the black plug-in power supply cable.