Mount Stand Tube - MIMSAL MIMLED 600 Manual

MOUNT ROLLERS

10.2.2 MOUNT STAND TUBE

CAUTION: DAMAGE TO THE UNIT
Without engaging the nose lock and then screwing the stand tube, the stand will fall
over. Engage nose lock and tighten screw with spring washer.
Take the roller base as described in the previous chapter and mount the stand tube as follows:
MOUNT STAND TUBE
24
5. Fully insert two rollers without brakes.
6. Check that the rollers are securely seated.
1. Unscrew the screw with spring washer from the
roller foot.
2. Loosen the Phillips screw so that the canopy can
be moved.
3. Insert the stand tube so that the recess in the
tube sits in the nose of the stand base and can no
longer be turned.