Table of Contents
Advertisement
10. MOUNTING THE LAMP HEAD
10.1 LAMP HEAD ASSEMBLY
Figure. Lamp Head accessorie
MOUNT LAMP HEAD
Security element.
1. Disconnect the power plug and secure it against
reconnection.
2. Remove the protective flap from the spring arm opening.
WARNING: RISK OF INJURY!
The spring arm, which is pressed down, can
spring up and cause injuries. No persons are
allowed to be within the swivel range of the
spring arm while the end unit is being mounted.
3. Slide the plastic sleeve onto the arm so that the two
slots are aligned.
4. Slide in the swivel arm end of the lamp head (remove
the grease protec-tion cover first).
21
Advertisement
Table of Contents
