MOUNT STAND TUBE
10.2.3 MOUNT SAFETY RING
Accessories included: washer (left); with collet of the housed circlip (right).
Figure. Accessory spring arm
CAUTION: DAMAGE TO THE UNIT
Without the washers mounted, the circlip becomes unscrewed and the spring arm
falls out of the connection. Always mount the washer.
4. Insert the stand tube so that the recess in the
tube sits in the nose of the stand base and can no
longer be turned.
5. Check for secure seating.
6. Screw in the screw with spring washer again and
tighten it firmly.
7. Press plastic half rings with sealing ring into the
stand base. Tighten the Phillips screw and check
that it is securely seated.
25