MIMSAL MIMLED 600 Manual page 37

WALL MOUNTING
17. Push the upper plastic cover part back up and put it on.
18. Screw the green-yellow cable from the extension arm, as well as
the green-yellow cable from the PE connection in the cover flap
to the wall bearing bracket.
19. Insert the bend protection sleeve from the plug-in power supply
unit into the recess.
20. Put on the housing cover and tighten it on the right and left with
one Phillips screw each.
21. Put on the cover cap of the extension arm and tighten it with a
Phillips screw.
37