UPS Electrical Installation
2.
At the AC Input terminal, make sure to wire the UPS for the proper input voltage as shown in
Split-phase power modules provide a 2-phase output which can be configured as output voltages: 110/110
for 220, 120/120 for 240, 120/120 for 208, or 127/127 for 220 Vac, as selected through the front panel
display
Figure 34. Split-Phase Power Modules
38
4–20kVA Users Guide P-164000669 4–20kVA Users Guide P-164000669—Rev 10
("7.15 Display Menu Screens
Split-Phase Power Modules
(3-wire plus ground input) (2 PEN)
110/220, 120/208, 120/240, 127/220 Vac
GND
L1
").
L2
Figure 34
N
.