Installing The Rear Wheel And Rear Brake - Yamaha MIO Service Manual

REAR WHEEL AND BRAKE
EAS00573
INSTALLING THE REAR WHEEL AND
REAR BRAKE
1. Lubricate:
• brake camshaft
2. Install:
• washer
• brake camshaft 1
WARNING
_
After installing the brake camshaft, remove
any excess grease.
NOTE:
_
Install the brake camshaft 1 with the punch
mark a facing away from the motorcycle.
3. Install:
• brake shoe wear indicator 1
M MMM M MMM
a. Install the brake camshaft so its punch mark
a is positioned as shown.
b. Align the projection b on the brake shoe
wear indicator with the notch in the brake
shoe camshaft.
c. Check that the brake shoes are properly
positioned.
L LLL L LLL
4. Install:
• brake shoe spring (brake camshaft side) 1
• brake shoe spring (pivot side) 2
• brake shoes
NOTE:
_
• Do not to damage the springs during installa-
tion.
• Install the brake shoe spring as shown.
6 - 13
CHAS
Recommended lubricant
Lithium-soap-based grease
M M MMM M M MMM M
L L LLL L L LLL L
M MMM M M MMM M MMM
L LLL L L LLL L LLL