Assembling The Front Fork Legs - Yamaha MIO Service Manual

2
1
FRONT FORK
EAS00659

ASSEMBLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
WARNING
_
• Make sure the oil levels in both front fork
legs are equal.
• Uneven oil levels can result in poor han-
dling and a loss of stability.
NOTE:
_
• When assembling the front fork leg, be sure
to replace the following parts:
- oil seal
- dust seal
• Before assembling the front fork leg, make
sure all of the components are clean.
1. Install:
• damper rod assembly 1
• rebound spring
• inner tube 2
CAUTION:
_
Allow the damper rod assembly to slide
slowly down the inner tube 2 until it pro-
trudes from the bottom of the inner tube.
Be careful not to damage the inner tube.
2. Lubricate:
• inner tube's outer surface
Recommended lubricant
Fork oil 10 W or equivalent
6 - 35
CHAS