Yamaha MIO Service Manual page 214

REAR WHEEL AND BRAKE
5. Install:
• brake camshaft lever 1
• brake camshaft lever bolt 2
• pin 3
• rear brake cable 4
• adjusting nut 5
NOTE:
_
• Align the punch mark on the brake camshaft
with the mark on the brake camshaft lever
positioned as shown a.
• Lubricate the brake camshaft 6 and pin 3
with lithium-soap-based grease.
6. Tighten:
• brake camshaft lever bolt
• wheel axle nut
CAUTION:
_
Do not loosen the wheel axle nut after tight-
ening it to the specified torque.
7. Adjust:
• rear brake lever free play
Refer to "ADJUSTING THE REAR BRAKE"
in chapter 3.
6 - 14
CHAS
7 Nm (0.7 m · kg, 5.1 ft · lb)
105 Nm (10.5 m · kg, 75 ft · lb)
Rear brake lever free play (lever
end)
10 ~ 20 mm (0.39 ~ 0.79 in)