Removing The Rocker Arms And Camshaft - Yamaha MIO Service Manual

1
1
EASF0022
REMOVING THE ROCKER ARMS AND
2
CAMSHAFT
1
NOTE:
_
Prior to remove the rocker arms and camshaft,
remove the cylinder head.
1. Loosen:
• locknuts 1
• adjusting screws 2
2. Remove:
• camshaft retainer 1
3. Remove:
• camshaft 1
NOTE:
_
Screw 8 mm bolt 2 into the threaded end of
2
the camshaft and then pull out the camshaft.
4. Remove:
• intake rocker arm shaft
2 1
• exhaust rocker arm shaft
• intake rocker arm
• exhaust rocker arm
NOTE:
_
Remove the rocker arm shafts with the slide
hammer bolt 1 and weight 2.
4 - 18
CAMSHAFT
Slide hammer bolt
90890-01085
Weight
90890-01084
ENG