8
MOWER MOUNTING
MOWER MOUNTING
MOUNTING THE MOWER DECK
To avoid serious injury:
A Park the machine on a firm and level surface.
A Apply the parking brake.
A Stop the engine and remove the key.
1. Before mounting the mower deck, raise the lift links to
the full up position.
2. Adjust the cutting height control dial to 1.5 in. position.
3. Change the direction of the front tires as shown in the
figure.
4. Place the mower deck at the right side of the machine.
5. Slide the mower deck under the machine, then lower
mower lift links.
6. Attach the lift links to the mower deck with attaching
hardware.
(1) Lift link
(2) Clevis pin, snap pin
7. Attach the PTO belt to the engine pulley. Refer the belt
routing.
(1) PTO belt
(2) Engine pulley
8. After mounting the mower, check the mower level. If
necessary, adjust the mower level and anti-scalp
rollers.
ADJUSTING THE MOWER
See "OPERATING THE MOWER" section.
DISMOUNTING THE MOWER DECK
For dismounting the mower deck, reverse the above
procedures.