Segway SGW570F-A3 Manual page 140

MAINTENANCE
Torque to specifi cation：
Torque
1. Stop the engine.
2. Put the gear shifter in "P" position.
3. Lock parking brake.
4. Lift the side of the vehicle by placing a suitable bracket
under the frame of the foot frame.
5. Loosen 4 hub mounting nuts with tools.
6. Remove the entire wheel.
The loose nut may cause the tire to fall off during
operation, which may cause an accident or rollover. Always
ensure that all nuts are tightened to the required value
(70~80)N·m. Do not use lubricating oil or grease on wheel
bolts or wheel nuts. Lubricating oil or grease may cause
excessive tightening of wheel nuts, resulting in damage to
bolt or spoke wheels. In addition, lubricating oil or grease
can cause wheel nuts to become loose and wheels may
fall off, which can lead to accidents and serious injuries.
Remove any lubricating oil or grease from wheel bolts or
wheel nuts.
Mounting nuts:70~80N.m Mounting nuts: 70~80N.m
CAUTION
!
134