Altering The Stitch Density - Bernina 790 PRO Manual

Decorative Stitches
Inappropriate bobbin case is used
Damage of the bobbin case.
> Use the special bobbinwork case (optional accessory).
> Fit the Open Embroidery Foot #20C/20D.
> Tap «Decorative Stitches».
> Select an appropriate decorative stitch.
> Turn the «Upper Multifunction Knob» and the «Lower Multi-function Knob» to set the stitch length and
> Tap «i-Dialog».
> Tap «Long Stitch».
> To adjust the upper thread tension, tap «Upper Thread Tension».

7.3 Altering the Stitch Density

With certain decorative stitches (e. g. No. 401) the stitch density can be altered. If the stitch density is
increased, the stitch distance is enlarged. If the stitch density is decreased, the stitch distance is shortened.
The programmed length of the stitch pattern is not affected.
> Select the decorative stitch.
> Tap «i-Dialog».
> Tap «Altering the Pattern Length/Stitch Density».
> Set the stitch density (1).
102
stitch width so that a beautiful stitch formation can be achieved even when sewing with thick thread.
– Every second stitch is sewn.
1