Changing The Stitch Type; Altering The Stitch Density - Bernina B 500 User Manual

Creative embroidering
> Touch the icon «i»-Dialog.
> Touch the icon «Bend text».
> Turn the «Upper Multifunctional knob» to alter the distance between the characters in millimeter-steps.
> Turn the «Lower Multifunctional knob» to the left or to the right to bend the lettering upwards or
downwards.

Changing the stitch type

If the satin stitches are too long, they can be changed to step stitches.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Change the stitch type».
1 2
> Touch the switch in the upper section of the display (1) to change the satin stitch to the step stitch.
> Adjust the desired stitch length (2) with the icons «-» or «+».

Altering the stitch density

If the satin stitches are embroidered too densely, the stitch density can be adjusted.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Change the stitch type».
> Adjust the desired stitch density (1) with the icons «-» or «+».
1
73