Changing The Stitch Type; Altering The Stitch Density; Checking The Size And The Position Of The Embroidery Motif - Bernina 540 User Manual

Creative embroidering

Changing the stitch type

If the satin stitches are too long, they can be changed to step stitches.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Change the stitch type».
1 2
> Touch the switch in the upper section of the display (1) to change the satin stitch to the step stitch.
> Adjust the desired stitch length (2) with the icons «-» or «+».

Altering the stitch density

If the satin stitches are embroidered too densely, the stitch density can be adjusted.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Change the stitch type».
> Adjust the desired stitch density (1) with the icons «-» or «+».
1

Checking the size and the position of the embroidery motif

It can be checked whether or not the embroidery motif matches the designated position/location on the
fabric. Points which are beyond the embroidery hoop are not traveled to.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
144