Threading The Twin Needle; Threading The Triple Needle - Bernina 790 PRO Manual

Sewing Preparation
> Guide the thread through the guides (7/8) above the presser foot.
> Guide the thread into the thread clamp (9) and pull it from the back to the front over the thread cutter.
> Switch the machine on.
> Push the button «Automatic Needle Threader».

Threading the Twin Needle

•
> Guide the first thread in direction of the arrow on the right side of the tension disc (1).
> Guide the second thread in direction of the arrow on the left side of the tension disc (1).
> Guide the first and the second thread to the thread guide above the needle.
> Thread the first thread manually into the right needle.
> Thread the second thread manually into the left needle.

Threading the Triple Needle

•
> Place the foam pad, the thread spool and the appropriate spool cap on the horizontal spool pin.
> Place the foam pad on the vertical spool pin.
46
7
9
8
– The thread is threaded into the needle.
The twin needle is inserted.
1
The triple needle is inserted.