Selecting The Embroidery Design; Embroidery Foot; Attaching The Embroidery Foot; Selecting The Stitch Plate In The User Interface - Bernina 790 PRO Manual

Embroidery Preparation

Selecting the Embroidery Design

All of the embroidery designs can be either directly embroidered or can be changed using different functions
offered by the embroidering machine. You can find all embroidery designs at the end of the instruction
manual. All the stitch patterns contained in the sewing mode can also be embroidered. The stitch patterns
are displayed in files, sorted in Categories, like in the sewing mode. In addition to that, embroidery designs
can be downloaded from the Personal Memory or from the USB stick (optional accessory).
> Tap «Home».
> Tap «Embroidery Mode».
> Select an alphabet, embroidery design, stitch pattern or a personal embroidery design from a file.

13.3 Embroidery Foot

Attaching the Embroidery Foot

> Raise the needle.
> Raise the presser foot.
> Switch off the machine.
> Push the clamping lever up.
> Remove the presser foot.
> Insert the embroidery foot from below into the bracket.
> Press the clamping lever down.

Selecting the Stitch Plate in the User Interface

After fitting the corresponding embroidery foot, it can be selected and saved on the machine. Furthermore,
any alternative feet that are available for the respectively selected embroidery design are displayed.
> Switch the machine on.
> Select the embroidery design.
137