Altering The Stitch Density; Checking The Size And The Position Of The Embroidery Design - Bernina 570 QE User Manual

Creative Embroidering
> Tap «Alter Stitch Type/Stitch Density».
1 2
> Touch the switch in the upper section of the display (1) to change the satin stitch to the step stitch.
> Set and confirm the stitch length 2.

Altering the Stitch Density

If the satin stitches are embroidered too densely, the stitch density can be adjusted.
> Select the embroidery design.
> Tap «i-Dialog».
> Tap «Alter Stitch Type/Stitch Density».
1
> Adjust the stitch density (1).

Checking the Size and the Position of the Embroidery Design

It can be checked whether or not the embroidery design matches the designated position/location on the
fabric. Points which are beyond the embroidery hoop are not traveled to.
> Select the embroidery design.
> Tap «i-Dialog».
150