Positioning the Embroidery Design proportionally in a Square
This function allows embroidery designs to be placed exactly on the fabric in a square boundary. In this
process, the embroidery design is inserted proportionally and centered within the boundary.
1
1
Corner Point
2
«Fit»
3
«Margin Spacing»
•
The four corner points of the embroidery design are marked on the fabric with chalk or a water-soluble
pen. The place or the location where the embroidery design is to be positioned is clearly visible.
•
The attached embroidery hoop is selected.
> Select the embroidery design.
> Adjust the size of the embroidery design to fit into the hoop, as well as the position and the alignment.
> Tap «i-Dialog».
> Tap «Pinpoint Placement».
> Tap «4-point Placement».
> Tap «Fit».
> Select one of the corner points and position the needle over the corresponding marking on the fabric via
the multi-function knobs. For the precise positioning of the needle, the laser can be switched on.
> Select the next corner point and position the needle.
> If necessary, adjust the margin spacing.
–
The embroidery design is placed and can be embroidered.
15.7 Combining Embroidery Designs
Combining Embroidery Designs
Several embroidery designs can be combined with each other.
> Select the embroidery design.
Creative Embroidering
2
3
4
5
4
«Maintain the Embroidery Design Size»
5
«Resetting»
159