Part 1: Fpga Development Board Introduction - Alinx KINTEX-7FPGA User Manual

Part 1: FPGA Development Board Introduction

The AX7325B FPGA development board is mainly composed of KINTEX-7
main chip, 4 DDR3, 1 memory stick SODIMM interface, 1 QSPI FLASH and
some peripheral interfaces. The FPGA development board uses Xilinx's
KINTEX-7 series of chips, model number XC7K325TFFG900. Four DDR3
memory chips are connected to the HP port of the FPGA chip, each with a
DDR3 capacity of up to 512M bytes, which makes up 64-bit data bandwidth. A
SODIMM interface is connected to the HR port of the FPGA to fit a 64-bit DDR3
memory module. A 128Mb QSPI FLASH is used to statically store configuration
files or other user data of the FPGA chip.
The AX7325B development board expands the rich peripheral interface,
including one PCIex8 interface, four 10G optical SFP interfaces, one 40G
optical fiber + QSFP interface, one UART serial interface, one SD card
interface, and one FMC expansion interface. 1 40-pin expansion port and some
button LEDs.
www.alinx.com
KINTEX-7 FPGA Development Board AX7325B User Manual
5 / 49