3onedata NP Series User Manual page 9

Serial device server

Hide thumbs Also See for NP Series:

Table of Contents

Before remote configuration, please make sure the route between computer and



switch is reachable.

Before making a local configuration, make sure that the IP address of the



computer and the serial server are on the same subnet.

Notes:

When the serial server is first configured. If it is configured locally, make sure the current

computer network segment is 1.

Eg: Assume that the IP address of the current PC is 192.168.5.60, change the

network segment "5" of the IP address to "1".

Operation Steps

Amendment steps as follows:

Step 1 Open "Control Panel> Network Connection> Local Area Connection> Properties>

Internet Protocol Version 4 (TCP / Ipv4)> Properties".

Step 2 Change the selected "5" in red frame of the picture below to "1".

Step 3 Click "OK", IP address is modified successfully.

Step 4 End.

3onedata proprietary and confidential

NP Series Serial Server User Manual

Table of Contents

Np301