TCP Server Mode
Background introduction
Assuming that the serial port "COM1" of the serial server is operating in the "TCP
server mode", passively waiting for one host PC to connect, and the host can read or
send Ethernet data to a serial device.
The parameters of the serial server (TCP server) are as follows:
IP Address: 192.168.1.250
Local Port: 30000
Baud rate: 115200
Parity bit: None
Data bit: 8
Stop bit: 1
Host PC (TCP client mode) parameter information as follow:
IP address: 192.168.1.61
Operation Steps
Step 1 Configure the IP address of the serial server.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
NP Series Serial Server User Manual
62