Table of Contents
Advertisement
Support up to 4-computer communication, as long as the multi-session
connection is enabled.
12. When the two computers correspond to a virtual serial port, will the
communication be intermittent?
Open 2 sessions and establish two virtual serial port connections for
communication.
13. Can the serial server communicate after crossing the network segment?
Yes, set the default gateway address, the serial server can cross-network
communication.
14. In the use of the process found that the serial server LEDs all bright, can
not communicate properly?
LAN storm. Troubleshooting: Host directly connected to the serial server.
-
Network IP address conflicts. Troubleshooting: the host directly connected
-
with the serial server, modify the IP address of the serial server.
The baud rate is set too high. Troubleshooting: Modify the baud rate of the
-
serial server.
Indicator is abnormal. Troubleshooting: Replace the other serial server for
-
testing.
15. Serial server work in TCP client mode, can support virtual serial
communication?
Serial server work in TCP Server mode, support virtual serial
-
communication, RealCom function is turned on.
Serial server work in TCP Client mode, does not support virtual serial
-
communication, RealCom function is turned off.
Serial server work in UDP mode, does not support virtual serial
-
communication, RealCom function is turned off.
16. Communication environment: computer + wireless router + serial server,
can use this way?
The computer is connected via WiFi, but the VSP software on the computer must
search for the device (the wireless router and the serial server must be on the
same network segment).
17. What is the wiring situation when the serial server uses RS-485
communication?
RS-485 terminals are T + / D + and T- / D-.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
NP Series Serial Server User Manual
102
Advertisement
Table of Contents
