Main element configuration instructions in System File interface.
Interface Element
Restore
Factory
Default
Download
Configuration File
Upload
Configuration
Upgrade Firmware
In the process of configuration file upload or firmware upgrade, don't click or configure
other WEB page of serial server, or restart serial server; otherwise configuration file
uploading or firmware upgrading will fail, which will cause serial server system
breakdown and other scenes.
Load factory default will cause all device status to be the factory status, default IP
address is "192.168.1.254".
Description
Click "Start" to restore the serial server to the factory
configuration.
Click "Download" to download the current configuration file
for the serial server.
Click "Choose File", select the profile you are ready, click
"Upload", you can upload the existing configuration to the
serial server.
Click "Choose File", select your prepared software upgrade
file, click "Upgrade", you can achieve serial server software
online upgrade.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
NP Series Serial Server User Manual
54