UDP Multicast Mode
Background introduction
It's assumed that serial server IP address is "192.168.1.250", user needs to add the
serial server to the multicast address "239.0.0.0". So that the serial server through
the UDP protocol can make the serial device data through unicast or multicast sent to
one or more hosts, but also can receive from one or more host unicast or multicast
data, complete multipoint-to-multipoint communication.
The parameters of the serial server are as follows:
IP Address: 192.168.1.250
Local Port: 30000
Baud rate: 115200
Parity bit: None
Data bit: 8
Stop bit: 1
Host PC parameter information as follow:
IP address: 192.168.1.61
Local Port:31000
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
NP Series Serial Server User Manual
92