Can Mode Information - 3onedata NP Series User Manual

UDP Multicast Mode interface main element configuration instructions:
Interface Element
Session Number
Group Number
Dest Address
Dest Port
Multicast address
Listen port
Apply to all Port

CAN Mode Information

Function Description
On the "COM Mode Information" page, you can view the operating modes for each
serial port number.
Operation Path
Open in sequence: "Serial Server> COM Mode Information".
Interface Description
COM mode information interface screenshot
Description
The number of hosts that one serial port connects to.
Each host communicates with serial port in the order of

first-in first-out;
The system supports up to 4 connections.

Select the number of multicast groups and support up to four
multicast groups.
Enter the IP address of the host that will be connected by serial
device server.
Enter the port number of the host that will be connected by
serial device server.
Group address is used for identifying an IP multicast group,
multicast address range is: 224.0.0.0 ~ 239.255.255.255. The
device can send or receive group data to or from multiple
hosts.
The network receives the listening port of UDP data. The user
must assign a unique listening port to each serial port so that
the system can normally receive UDP data.
Check the "Apply to all port" check box to apply the current
settings to all serial ports.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
NP Series Serial Server User Manual
37