Troubleshooting - point ORBIT ONE User Manual

CLEANING OF PARTS OF CLEANING BASE STATION
Step 1: Clean the sewage tank.
Open the cleaning base station's top
cover, dismount the sewage tank,
open the sewage tank release buckle,
clean the sewage tank with the long
cleaning brush, have it dried in the air
and mount it again to the cleaning
base station.

TROUBLESHOOTING

If the product fails in operation, the ON/OFF button indicator will flash
quickly in red, accompanied by an audible alarm. Eliminate the fault as
instructed below. If the fault remains unchanged after that, please contact
our after-sales service department.
Error phenomenon (main body)
Error 1: Check whether the
radar is blocked, started in
a new position or stuck.
Sewage tank
release buckle
Solution
Check whether the radar is blocked by any obstacle or
stuck by any foreign matter and, if it is, remove the
obstacle, or the foreign matter.
Do not use the appliance in any place with strong light.
If the fault remains unchanged, move the main body to a
new position and start it again.
20
Step 2: Clean the tray base.
Dismount the tray base, clean it with
the cleaning brush and mount it again
to the cleaning base station.
Tray