point ORBIT ONE User Manual page 12

POWER ON/OFF AND CLEANING
1. Power-on/o
Power-on: Long press the ON/OFF button. After that, the ON/OFF
button indicator will be lit and the main body will be on standby.
Power-o : Long press the ON/OFF button, and the ON/OFF button
indicator will go out slowly and the main body will power o .
2. Charging
After cleaning, the main body will automatically back to the cleaning
base station and get recharged.
If the cleaning function is not enabled while the main body is in the
charging position of the cleaning base station, the main body may fail to
get recharged. Put it on the cleaning base station manually.
When the main body is being recharged, the recharging indicator will
flash slowly; when the main body has been fully charged, its ON/OFF
button indicator will remain lit.
3. Overall cleaning
Upon the first-time cleaning, the product will scan, divide the floor,
make a map, clean along the walls and then clean in a zigzag path and
finally back to the cleaning base station automatically.
Partial cleaning button
If it is short pressed, the main body will get
recharged automatically after partial cleaning.
If it is short pressed in operation, the main body
will pause.
ON/OFF button
If it is short pressed, the main body will get
recharged automatically after overall cleaning.
If it is long pressed, the main body will get
powered o .
If it is short pressed in operation, the main body
will pause.
Recharge button
If it is short pressed, the main body will
get recharged.
12