point ORBIT ONE User Manual page 21

TROUBLESHOOTING
Error phenomenon (main body)
Error 2: Check whether the
bumper is stuck.
Error 3: Wipe the cli
sensor and start the
appliance in a position far
away from any dangerous
area.
Error 4: Check whether the
main brush is stuck.
Error 5: Check whether the
side brush is stuck.
Error 6: Check whether the
main wheel is stuck.
Error 7: Please remount
the dust box.
Error 8: Low battery! Please
recharge the product.
Error 9: Recharging failed.
Check whether the main body
is correctly connected with the
cleaning base station.
Error 10: Abnormal battery
temperature. Please try again
later.
Solution
Check whether the bumper is stuck by any foreign matter
and, if it is, remove the foreign matter and touch the
bumper gently multiple times to check whether it is flexible.
Check whether the appliance is stuck in a too small space
and, if it is, move it to a new position and start it again.
Check whether the main body is suspended and, if it is,
move it to a new position and start it again.
Check whether the cli sensor is blocked by any foreign
matter such as dust and wipe it at regular intervals.
Check whether there is any woolen yarn, electrical wire or
any other foreign matter twined on the main brush and,
if there is, dismount the main brush and clean it.
Remove any woolen yarn, electrical wire, or other articles tending
to twine on the brushes on the indoor floor for cleaning.
The main brush tends to su er twining by foreign
matters. Please clean it at regular intervals.
Whether there is any woolen yarn, electrical wire or any
other foreign matter twined on the side brush and, if
there is, dismount the side brush and clean it.
Remove any woolen yarn, electrical wire, or other articles tending
to twine on the brushes on the indoor floor for cleaning.
The side brush tends to su er twining by foreign
matters. Please clean it at regular intervals.
Check whether there is any foreign matter twined on the
main wheel and, if there is, remove it.
Please remount the dust box and make sure both it and
the filter screen are correctly mounted.
If they are both correctly mounted, replace the filter screen.
The battery is low. Please recharge it before continued use.
Use a dry cloth to wipe the main body's charging contact
piece, and the cleaning base station's charging contact.
The battery temperature is too high or too low. Do not
use the appliance until the battery temperature is normal.
21