point ORBIT ONE User Manual page 19

INSTRUCTIONS
Step 1: Replace the dust bag.
When the dust bag is full, replace it as promoted on the cleaning base station's
display. It is suggested to make the replacement every four weeks.
Open the
cleaning base
station's top
cover.
Step 2: Clean the dust passage.
Disconnect the power supply and
check whether the transparent dust
passage, and the dust inlet are
blocked. In the case of blockage,
please remove the foreign matter(s)
in time.
Transparent dust
passage
Lift the dust
bag handle
and dismount
the dust bag.
Dust inlet
Insert the Mount a
mouth of the new dust
dust bag into bag.
the cleaning
base station's
limit slot.
Step 3: Clean the infrared lens, and
the charging contact.
Use a clean soft cloth to wipe any
foreign matter on the infrared lens,
and the charging contact.
19
Mount the
cleaning
base
station's top
cover again.
Infrared lens
Charging contact (×2)