Removal Of The Compressor - Daikin SUPER MULTI NX G Series Service Manual

Outdoor Unit – 2MXS18GVJU
1.8

Removal of the Compressor

Procedure
Step
1 Remove the terminal
cover.
2 Disconnect the
compressor lead wires.
3 Remove the 2 sheets of
putty.
4 Remove the 3 nuts with
an open-end spanner.
 Make sure there is no
refrigerant gas left inside the
refrigerant pipes before
starting the job.
177
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
SiUS12-928
Points
 Be careful to avoid burning
the compressor terminals or
the nameplate.
Removal Procedure