SiUS12-928_A
Check Method 2
1. Press the center of the TEMP button and the MODE button at the same time.
2. Press the TEMP
3. Diagnose by the sound.
4. Press the MODE button.
Service Diagnosis
The left-side digit blinks.
or button and change the figure until you hear the beep
beep : The left-side digit does not correspond with the error code.
beep beep : The left digit corresponds with the error code but the right-side digit does not.
"long beep" : Both digits correspond with the error code.
→
(
See 7.)
The right-side digit blinks.
Service Check Function
(R4272)
(R4273)
(R4274)
(R4275)
(R4276)
98