Name Of Each Part - Renesas M38000TL2-FPD User Manual

2.3 Name of Each Part

Figure 2.1 System configuration
Figure 2.2 M38000TL2-FPD
(1) Emulation pod (M38000TL2-FPD)
(2) Connector for connecting the PC4701
(3) Flexible cable for connecting target system (PCA7733 REV.B)
(4) Probe direction converter board (28DP-WS, 32LCC-S)
(5) RESET, GND and Vcc cables
Host machine
(2) Connector for connecting the PC4701
This emulation pod contains an evaluation MCU, emulation memory and circuit to feature the
debugging functions.
This 120-pin flexible cable connects the PC4701 emulator and the emulation pod.
This cable connects the emulation pod and target system.
These are the pitch converter and direction converter boards. For details, refer to "3.4 Connecting
the Emulator MCU" (page 23).
Cables for connecting RESET, GND and Vcc pins on the target system. For details, refer to "3.6
M38000TL2-PSW (RESET, GND and Vcc Cables with Overcurrent Protective Circuits)" (page 27).
PC4701
Emulation pod main unit
(M38000TL2-FPD)
RESET, GND and Vcc cables with overcurrent protective circuits
(1) Emulation pod main unit
(M38000TL2-FPD)
(4) Probe direction converter board
(28DP-WS, 32LCC-S)
( 17 / 54 )
Target system
(3) Flexible cable for connecting target system
(PCA7733 REV.B)
(5) RESET, GND and Vcc cables with
overcurrent protective circuits