User Setting - Ganz DIGIMASTER DR-16M55-RA-4TB User Manual

System Setting

User Setting

You can configure the settings regarding user management and user and group permissions.
Management
\ \
You can add a user account(s) that can be edited at a later time.
From <SYSTEM SETUP> - <USER>, select
1.
<MANAGEMENT>.
Use the [ /ENTER] buttons on the remote
▲▼ ◀▶
2.
control or use the mouse to add a user account or
select an item that you want to edit.
To apply the change, click <APPLY> in the bottom of
3.
the screen.
When done, press the [EXIT] button on the remote
4.
control or click <CLOSE> in the lower screen. The
confirmation message appears and you will return to
the previous menu.
To add a user account
Click <ADD> in the bottom of the screen.
1.
Use the [ ] buttons on the remote control and
▲▼ ◀▶
2.
move to a desired item. Then, press [ENTER] to
select the item.
USER ID : enter the user ID using the virtual
i
keyboard.
PASSWORD : With the virtual keyboard, enter the
i
password.
GROUP : From <ADMIN>, <MANAGER>And
i
<USER>, select a group that the user belongs to.
EMAIL : Type in the e-mail address to which you will
i
receive notification of an event if it occurs.
EMAIL NOTIFY : Choose whether you will receive notification of an event if it occurs.
i
To use <EMAIL NOTIFY>, a sendmail server and its port should be configured previously.

COVERT CHANNEL : You can set the channel to hide from a specific user.
i
<COVERT CHANNEL> option hides the video of the selected channel from being displayed on the screen.

When done, click <OK>.
3.
The added user account will be listed.
50
|
System Setting