Display Setting - Ganz DIGIMASTER DR-16M55-RA-4TB User Manual

Display Setting

You can configure screen display setup for On-screen Display, monitor, dual monitor, sequence, spot out, and POS/ATM.
OSD
\ \
You can set Camera Name, Icon, Status Bar, Timeline, Borderline, User Name and Language.
From <SYSTEM SETUP> - <DISPLAY>, select
1.
<OSD>.
Use the [ /ENTER] buttons on the remote
▲▼ ◀▶
2.
control or use the mouse to set each option of the
OSD item.
CAMERA TITLE : specify the display of the camera
i
title on the screen.
RECORDING MODE ICON : specify the display of
i
the record mode icon on the screen.
STATUS BAR ON FULL SCREEN MODE : select
i
to show or hide the status bar in full screen mode.
AUTO HIDE : place the cursor in the lower area of the screen to display the status bar. If moving the cursor up,
-
the status bar will disappear.
ALWAYS ON : The status bar will be displayed at all times.
-
5 SEC ~1 MIN : If no mouse movement is detected for from 5 seconds to 1 minute, the status bar will disappear.
-
TIMELINE ON FULL SCREEN MODE : select to show or hide the timeline in full screen mode.
i
AUTO HIDE : place the cursor in the right corner to display the timeline. If moving the cursor to the left, the
-
timeline will disappear.
ALWAYS ON : The timeline will be displayed at all times.
-
ALWAYS OFF : The timeline will not be displayed.
-
ZOOM PIP : You can select the <ALWAYS ON>, <1~5 sec>, etc. to turn ON/OFF the PIP menu displayed in
i
ZOOM screen.
BORDER LINE : specify the display of the cross-border between channels in a split mode
i
BORDER COLOR : select a color for the border.
i
USER NAME : specify the display of the currently logged-in users on the status bar.
i
LANGUAGE : select a menu display language.
i
To apply the change, click <APPLY> in the bottom of the screen.
3.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
4.
message appears and you will return to the previous menu.
41
|
English