Advertisement
[テキストを入力]
Log In
Network Connection
Getting
Started
When the system starts, the login screen appears.
1.
Select the user ID and enter the password.
2.
The default user ID is "ADMIN"; the default password is "1234".
Click<OK>.
3.
For the security purpose, change the password right after you purchased
the product.
Status Bar
Item
Description
Select one of the system setup, search and backup menu items before
accessing it .
Show the ID of the user who has currently logged in.
Change the screen layout to display both status bar and time line at all times.
Used to select a split mode.
Switch between Auto Sequence and Special Split mode.
Display or hide the OSD menu on the screen.
Move to the PTZ screen. You can control the PTZ operations of
PTZ-compliant camera on the PTZ screen.
Move to the Zoom screen.
Display the log list of the recent recording events.
Quick Menu
Item
Channel No.
Play
Zoom
Snapshot Capture
Audio ON/OFF
Microphone ON/OFF
Language Setting
Press [SETUP] on remote control, or select <Menu> - <System Setup>
1.
from the status bar.
From <System Setup> - <Display>, select <OSD>
2.
Select a preferred language.
3.
Click <Apply>
4.
Besides the remote control buttons, you can also use the buttons on the status bar to control NVR.
Description
Display the number of the current channel.
Start playing the video of the selected channel from the specified time.
Zoom the video of the selected channel.
(Supported later).
Turn on or off the audio signal of the selected channel.
Turn on or off the microphone signal of the selected channel.
Live Screen
Video Window
Status Bar
Item
Description
You can use the camera supporting the audio input to listen the audio.
Select a camera to which the audio signal will be transferred from the
connected microphone.
Start the emergency recording.
Blink when the event occurs. It will not blink if no action to the event has been
set. Click to view information about the event that occured.
Show the external PC or mobile device that you used to access the network.
Show the disk space information. If you have set the disk overwrite mode, it
will be displayed "OW" (Over Write) from the start point of the overwriting.
Show the current time.
Timeline
Item
Description
Display the date of the current timeline.
Timeline Date
Click this to select a desired date of the timeline.
Zoom in/out the
Expand or collapse the timeline.
timeline
Move to the previous of next point of time in the timeline.
Navigation
You can also use the mouse wheel to navigate through
through timeline
the timeline
Represent the recorded data the color of each bar indicates:
Green : Continuous Recording
Timeline Bar
Red : Alarm Recording
Blue : Motion Recording
Yellow : Panic Recording
Double-click the time line to move to the Playback mode. Drag and drop it to make backup or
event search for the specified area.
Date/Time Setting
Press [SETUP] on remote control, or select <Menu> - <System Setup>
1.
from the status bar.
From <System Setup> - <System>, select <Date/Time>
2.
Specify the display format of the current time and date.
3.
As the existing data in the same time and date will be deleted if duplicates are found, backup the
existing data for later use.
Click <Apply>.
4.
Quick Menu
Timeline
Advertisement
