Record Setup
Operation Mode
\ \
You can set the recording options for Auto or Manual mode.
From <RECORDING> menu, select <OPERATION MODE>.
1.
] buttons or use the mouse to set <RECORDING CONFIGURATION MODE> to <AUTO
Use the [
▲▼ ◀▶
2.
CONFIGURATION> or <MANUAL CONFIGURATION>.
Set the recording options for each selected Record mode.
3.
To apply the change, click <APPLY> in the bottom of the screen.
4.
When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
5.
message appears and you will return to the previous menu.
Auto Configuration
If you choose your preferred record mode, the DVR will recommend you the optimized settings for the selected record
mode.
CONTINUOUS RECORD : Recording will proceed
i
in the best quality regardless of the event at all
times.
As this option will always make recording in the
best quality, the recording period is the shortest
compared to the other record modes.
MOTION RECORD : Recording will proceed only if
i
a motion is detected.
ALARM RECORD : Recording will proceed only if
i
an alarm event occurs.
MOTION/ALARM RECORD : Recording will
i
proceed only if a motion is detected or an alarm
event occurs.
INTENSIVE MOTION RECORD : Normally recording will be performed in a normal quality. However, the quality will
i
switch to high if a motion is detected.
INTENSIVE ALARM RECORD : Normally recording will be performed in normal quality. However, the quality will
i
switch to high if an alarm event occurs.
INTENSIVE MOTION/ALARM RECORD : Normally recording will be performed in normal quality. However, the
i
quality will switch to high if an alarm event occurs or a motion is detected.
Motion : Normally, it means the movement of an object. However, it implies a change to the illumination in the context of the DVR.
Ex) Vehicle lights (headlights), illumination change, etc.
79
|
English