Search Settings - Ganz DIGIMASTER DR-16M55-RA-4TB User Manual

Search

Search Settings

Time Search
\ \
With the calendar, you can search for the recording data by the recorded date.
From the <SEARCH> menu, select <TIME SEARCH>.
1.
Use the [ ] buttons or use the mouse to specify
▲▼ ◀▶
2.
the search date and time from the calendar in the left
corner of the screen.
FIRST : The first date of recording is automatically
i
selected.
LAST : The last date of recording is automatically
i
selected.
: Press this to display the time selection menu
i
where you can specify the time and date.
You can identify the type of the recording data by the color in the bar.
3.
Yellow green (Pre recording) : The pre-recording is performed on the recording data after you set the <PRE
i
RECORDING TIME> from <OPERATION MODE>.
Green (Continuous) : The continuous recording is performed on the recording data.
i
Red (Alarm) : The alarm event recording is performed on the recording data.
i
Blue (Motion) : The motion event recording is performed on the recording data.
i
Yellow (Panic) : The panic manual recording is performed on the recording data.
i
Click to move to a desired start time in the time bar, or use the buttons at the bottom of the status bar to make search.
4.
: Recall the recording data.
i
: Expand the timeline of the time bar to a
i
greater unit of time.
: Collapse the timeline of the time bar to a
i
smaller unit of time..
: Use this to move to a previous time that
i
is hidden in the time bar as it is expanded to a
greater time unit.
: Use this to move to a next time that is
i
hidden in the time bar as it is expanded to a
greater time unit.
Click a thumbnail channel or use the [
5.
[ENTER]. You can check the video in <PREVIEW>.
Click to move to a desired time, or simply double-click a desired time in the time bar to play the video data on that time.
J
Press the [ENTER] button again on the remote control with the mouse, or simply double-click on the channel.
6.
You will move to the playback screen.
If you want to stop playing and return to the search screen, press [EXIT] or [SEARCH] on the remote control.
7.
You can also click <MENU> in the lower left corner and select a desired menu.
86
|
Search
] buttons on the remote control to move to a desired channel and press
▲▼ ◀▶