Monitoring - Ganz DIGIMASTER DR-16M55-RA-4TB User Manual

Monitoring

START
\ \
Connect the adaptor to the power input port on the
1.
DVR s rear side.
'
Make connection when the power is not applied yet.
J
Turn on the power switch in the rear panel of DVR.
2.
With a beep, the logo screen appears several
seconds after the front LED turns on.
When the booting process is completed, the live
3.
screen then the login screen appears.
User Information Setup
\ \
SET PASSWORD
For enhanced security of DVR, enter a new password on DVR boot.
Enter a new password in the <NEW PASSWORD> field.
1.
Enter exactly the same password in the <CONFIRM
2.
NEW PASSWORD> field.
Click <OK>. The password changes to the set
3.
password.
AUTHENTICATION INFORMATION
SETUP
In case you forgot your PASSWORD, you can reset it
through email verification.
Enter your E-MAIL in <E-MAIL ADDRESS> for verification.
1.
Click <OK>. E-MAIL ADDRESS is registered.
2.
In case you forgot your password, you can click <Forgot Password?> to verify your E-MAIL and change your password.
J
Log In
\ \
To manipulate or access the menus of DVR, you should have logged in.
When the system starts, the login screen appears.
1.
Select a user and provide the password.
2.
The initial administrator ID is
should be set when logging in for the first time.
Click <OK>.
3.
If the login information is correct and valid, you will
see the live screen.
For security purpose, change the password before you
J
use the product for the first time after purchasing it.
22
|
Monitoring
ADMIN
and the password
" "