Configuring The Live Display - Ganz DR8NRT Instruction Manual

Press the mouse right button from live display and the menu screen would be shown.
When "setup" button from front panel is pressed, it will enter "system setup menu of configuration"
directly.

Configuring the Live Display

Configuring the Live Display Configuring the Live Display Configuring the Live Display
• Display Type: The operator could select 5 different display types.
Camera Arrangement: The operator can edit the camera location for each display type.
After clicking the one of 16 channel buttons, select below section. Then display channel will be changed
according to the selection. Additionally the operator can select next display by clicking the arrow
buttons.
Alarm Detection channel show each channel.
When the operator drags the mouse to the
bottom left of the screen, this pop-up
screen will appear.
By pressing each button, the operator
can turn (On/Off) the functions of the
above pop-up screens.
LIVE DISPLAY LIVE DISPLAY
LIVE DISPLAY LIVE DISPLAY
20
Click the right mouse button on the
Live Display screen, next click the
DISPLAY DISPLAY DISPLAY DISPLAY menu.