Sockets - Mercedes-Benz G-Class Owner's Manual

Controls in detail
Features
Opening/closing the garage door
The integrated remote control adopts the
function of the garage door remote control
once it has been programmed. You should
therefore also read the garage door sys-
tem Operating Instructions.
Switch on the ignition.
Press the transmitter button in the
rear-view mirror which you have pro-
grammed to operate this garage door.
i
The transmitter transmits a signal all
the time the transmitter button is being
pressed. Transmission is aborted after
a maximum of 20 seconds and indica-
tor lamp 1 flashes. Press the transmit-
ter button again if necessary.
242
Clearing the remote control memory
Switch on the ignition.
Press and hold buttons 2 and 4 for
approximately 20 seconds until indica-
tor lamp 1 flashes rapidly.
The memory is cleared.
i
Clear the remote control memory be-
fore you sell the vehicle.
Nur fuer internen Gebrauch

Sockets

Socket on the centre console
The socket is located at the rear of the cen-
tre console.
P68.20-3034-31
Raise the cover and insert the plug.