Controls in detail
Loading
Attaching the safety net at the bottom
P68.50-2187-31
5 Hook
6 Lashing eyelet
Adjust straps 4 to the necessary
length for lashing eyelets 6 using ten-
sioning buckles 3.
Attach hook 5 to lashing eyelets 6.
108
Tightening the safety net
Pull the loose ends of straps 4 to gen-
tly tighten safety net 1.
Raise the rear bench seat
( page 100).
The safety net is pulled tight by the rear
bench seat.
i
Check the tension of the safety net af-
ter travelling a short distance. Retight-
en the safety net if necessary.
Nur fuer internen Gebrauch
Removing the safety net
Loosen straps 4.
Move tensioning buckles 3 to the
horizontal position.
Unhook hook 5.
Unhook safety net 1 at the top.
Roll up safety net 1 and fasten it with
the Velcro fasteners from the glove
compartment.
Place the safety net behind the rear
bench seat.