Operating System; Multi-Function Display - Mercedes-Benz G-Class Owner's Manual

Operating system

The operating system is activated as soon
as the ignition is switched on. You may per-
form the following using the operating sys-
tem:
Call up the information about your
vehicle
Make settings
You can use this not only to find out when
the next service is due, but also to set the
language for messages in the instrument
cluster and much more.
Risk of accident
Only use the operating system when road and
traffic conditions permit. You will otherwise
be too distracted and could cause an accident
as a result.
The operating system shows the informa-
tion in the multi-function display.

Multi-function display

The multi-function display is in the speed-
ometer. The basic status of the multi-func-
tion display shows the trip meter and the
total distance recorder in the centre of the
speedometer. This is referred to as the
standard display. The standard display will
also show you if any malfunctions are
present.
P54.30-XXXX-31
G
1 Trip meter
2 Total distance recorder
3 Outside temperature
4 Clock
5 Selector lever position/automatic
transmission shift range
6 Transfer case display
Nur fuer internen Gebrauch
Controls in detail
Operating system
The basic status of the multi-function dis-
play shows the current:
trip meter value
total distance recorded
as well as the:
outside temperature
time
transfer case display
selector lever position/shift range
If a different display is shown, press the
è or ÿ button repeatedly until the
standard display appears.
129