Install An Edsff Cage - Lenovo ThinkSystem SR630 Maintenance Manual
Hide thumbs
Also See for ThinkSystem SR630:
- Maintenance manual (182 pages) ,
- Product manual (75 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
Step 3.
Remove the EDSFF cage from the chassis.
Figure 52. EDSFF cage removal
a.
Press down the extended tab on the other side of the front chassis.
b.
Slide the EDSFF cage out of the front chassis.
After you finish
1. Install a new EDSFF cage. See "Install an EDSFF cage" on page 113.
2. If you are instructed to return the old EDSFF cage, follow all packaging instructions and use any
packaging materials that are provided.
Install an EDSFF cage
Use this information to install an EDSFF cage.
About this task
Attention:
• Read "Installation guidelines" on page 83 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Cmxb8e4L4PvMQ7J5PxvuOK
• Youku:
https://list.youku.com/albumlist/show/id_59643656
Procedure
.
Chapter 4
Hardware replacement procedures
113
Advertisement
Table of Contents
