Table of Contents
Advertisement
Step 2.
Lift the fan cage assembly from the server.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the fan cage assembly
Use this procedure to install the fan cage assembly.
Before installing the fan cage assembly:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
3. Watch the procedure
A video of this procedure is available at YouTube:
PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE
To install the fan cage assembly, complete the following steps:
Step 1.
Align the fan cage assembly to the slots on both sides of the server, and lower it into the server.
Figure 46. Fan cage assembly installation
Step 2.
Rotate the fan cage release latches down until they stop.
After installing the fan cage assembly, complete the following steps:
1. Reinstall the top cover (see
2. Reconnect the power cords and any cables that you removed.
3. Install the server in the rack.
4. Power on the server and any peripheral devices.
49).
.
"Install the top cover" on page
"Safety" on page iii
https://www.youtube.com/playlist?list=
134).
.
Chapter 3
Hardware replacement procedures
and
"Installation
61
Advertisement
Table of Contents
