Lenovo ThinkSystem SR630 Maintenance Manual page 35

Table 13. Components on the front of the server
Callout
LCD diagnostics panel assembly
1
USB 3.2 Gen 1 (5Gbps) connector
3
XClarity Controller USB connector
5
Rack latch (right)
7
Drive bays (16)
9
Note: For more information about each component, see "Front components overview" on page 25.
Front components overview
Diagnostics panel
The diagnostics panel is integrated in front I/O assembly on some models. For information about the controls
and status LEDs on the diagnostics panel, see "Diagnostics panel" on page 26.
Drive LEDs
Each hot-swap drive comes with an activity LED and status LED and the signals are controlled by the
backplanes. Different colors and speeds indicate different activities or status of the drive. The following
illustration shows the LEDs on a Hard disk drive or solid–state drive.
Figure 4. Drive LEDs
Drive LED
Drive status LED (right)
1
Drive activity LED (left)
2
External diagnostics port
The connector is for connecting an external diagnostics handset. For more about its functions, see "External
LCD diagnostics handset" on page 33.
Status
Solid yellow
Blinking yellow (blinking slowly, about one
flash per second)
Blinking yellow (blinking rapidly, about four
flashes per second)
Solid green
Blinking green
Callout
LCD diagnostics panel
2
External diagnostics connector
4
VGA connector (optional)
6
Pull-out information tab
8
Rack latch (left)
10
Description
The drive has an error.
The drive is being rebuilt.
The RAID adapter is locating the drive.
The drive is powered but not active.
The drive is active.
Chapter 2
.
Server components
25